发送询价
主要功能特点：
分体式结构设计，操作更方便，数据更；
大屏幕液晶显示，全中文菜单操作；
采用分流式取样技术、柴油车加速、减速和稳速时均可测量烟度；
数据自动线性化处理，可显示不透光度N、光吸收系数K；
采用“空气幕”技术保护光学系统免受污染；
检测室自动恒温控制，可防冷凝而影响测试精度；
附自动时间显示；
配内置全自动打印机（或数字RS－232A）接口或模拟输出接口）；
配转速、油温测试通道；
符合ISO116614和GB3847－2005技术要求。
大屏幕液晶显示，全中文菜单操作；
采用分流式取样技术、柴油车加速、减速和稳速时均可测量烟度；
数据自动线性化处理，可显示不透光度N、光吸收系数K；
采用“空气幕”技术保护光学系统免受污染；
检测室自动恒温控制，可防冷凝而影响测试精度；
附自动时间显示；
配内置全自动打印机（或数字RS－232A）接口或模拟输出接口）；
配转速、油温测试通道；
符合ISO116614和GB3847－2005技术要求。
主要技术参数 :
测量范围 不透光度N: 0～(相当烟度值0～10FSN)
光吸收系数K:0～16.06m-1
转速：0-9990rpm 油温: 0-150℃
示值误差 ≤±2%(测量值)
稳定性 自动校零，量矩漂移≤±1%/4h
重复性 重复误差≤±1%
分辨率 N为0.1%, K为0.01m-1 ,转速为10rpm,油温为0.1℃
输出方式 中文液晶显示，可附打印机打印烟浓度(暗度zui大值)，即时
曲线、测试时间、日期等。可附接口与计算机联网。
测量室温度 70℃(自动恒温)，当温度误差≥±10%时，温度及错误指示灯亮
环境条件 温度-5～50℃，相对湿度≤90%
电源 AC100-240V 50/60Hz 消耗功率150VA
外形尺寸 控制单元 240mm(长)×310mm(宽)×170mm(高)
(含支架） 光路单元 130mm(长)×400mm(宽)×390mm(高)
重量 控制单元 4kg
光路单元 5kg
Main Features:
◆Separated structural design, operation more convenient and more accurate data
◆Large-screen LCD display, full English menu;
◆Adopted a triage-type sampling technique, diesel vehicle acceleration, deceleration, and steady speed
◆Large-screen LCD display, full English menu;
◆Adopted a triage-type sampling technique, diesel vehicle acceleration, deceleration, and steady speed
can be measured when the smoke;
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption
coefficient K and the corresponding value of filter paper-type smoke Sf
◆Use of "air curtain" technology to protect the optical system from contamination;
◆Automatic detection of room temperature control, anti-condensation can affect the test accuracy;
◆Automatically attached to the time display;
◆Automatic with built-in printer (or digital RS-232A) interface or analog output interface);
◆With rotational speed, oil temperature test channel;
◆In line with ISO116614 and GB3847-2005 technical requirements.
◆Use of "air curtain" technology to protect the optical system from contamination;
◆Automatic detection of room temperature control, anti-condensation can affect the test accuracy;
◆Automatically attached to the time display;
◆Automatic with built-in printer (or digital RS-232A) interface or analog output interface);
◆With rotational speed, oil temperature test channel;
◆In line with ISO116614 and GB3847-2005 technical requirements.
Main technical parameters:
Test Scope：No light transmission N:：0～ (equivalent to smoke value 0 ~ 10FSN)
Light absorption coefficient K：0-16 .06 m-1
RPM：0-9990rpm OIL TEMP: 0-150℃
Indication error of +/- 2% ( measured value)
Stability of automatic zero adjustment, moment drift less than+/-1% / 4H
Repeatability repetition error of +/-1%
Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃
Output mode liquid crystal display, can be attached printer
( dark smoke concentration degree maximum ), real-time curve, test time, date. Can interface with computer networking
Measurement of smoke temperature of 70 degrees C ( automatic thermostat ),
when the temperature error +/-10%, temperature and error indicator light
Environmental conditions of temperature -5 to 50 DEG C, relative humidity 90%
AC100-240V 50/60Hz 150VA power source power consumption
Dimensions ( including bracket) control portion of the 240mm (L) x 310mm (W) x 170mm (H)
Light path part 130mm (L) x 400mm (W) x 390mm (H)
Weight control section 4kg
Light path part 5kg