斯派莎克热动力蒸汽疏水阀TD16是用水桶的重量，以对抗压力打开阀门一个简单的杠杆系统。倒吊桶只有两个运动部件，这意味着没有复杂的联系，以绑定或堵塞。斯派莎克热动力蒸汽疏水阀TD16被评为在以下方面：耐磨损，耐腐蚀和水力冲击。警方采取行动打击反压，吹扫空气和污物处理能力，轻负载下的性能。该斯派莎克热动力蒸汽疏水阀TD16更适合发泄的空气在低压下。该斯派莎克B1H系列卧式直列倒陷阱允许蒸汽从陷阱的一侧进入，并且冷凝物从阱的另一侧排出。在B1H系列铸铁陷阱具有250 psi的zui大工作压力，用一个不锈钢桶标配，并且杠杆机理探讨。在B1H系列具有进口到出口的5维“的6-3/8 ”的高度和6-1/4lbs的重量。

Spirax-Sarco inverted bucket traps are a simple leverage system that uses the weight of the bucket to open the valve against pressure. The inverted bucket has only two moving parts which means no complicated linkages to bind or clog. The inverted bucket trap is rated excellent on the following: resistance to wear, corrosion, and hydronic shock. Operation against back pressure, ability to purge air, and handle dirt, and performance under light loads. The Spirax-Sarco float and thermostatic trap is better suited to vent air at low pressures. The Spirax-Sarco B1H series horizontal in- line inverted trap allows steam to enter from one side of the trap, and the condensate to discharge from the opposite side of the trap. The B1H series cast iron trap has a maximum operating pressure of 250 psi and comes standard with a stainless steel bucket, and lever mechanisim. The B1H series has a inlet to outlet dimension of 5", a height of 6-3/8" and a weight of 6-1/4lbs.