Arranging the get wet in the rain test apparatus

适用于外部照明和信号装置及汽车灯具外壳防护。

Suitable for exterior lighting and signal device and vehicle lamps shell protection.

箱体结构:导向立柱采用优质槽钢焊接外面采用不锈钢拉丝板拼接而成。可调转速的样品台。 

控制系统:用流量计调节压力大小。采用进口变频器控制转速有效保证试验按标准运行。配备水过滤器 

Enclosure structure: guide pillar is made of high quality channel steel welded stainless steel wire drawing board together without outside. Adjustable speed of the sample.

Control system: USES adjustment pressure meter size. Adopt imported inverter control speed effectively guarantee the test according to the standard operation. Equipped with a water filter

  

符合标准:Conform to the standard:

GB10485-89 GB4208-93 GB/T4942

规格与技术参数：

Specifications and technical parameters

摆管半径：R400mm R600mm R800mm R1000mm  R1200mm 

性能指标:摆管摆辐角度: ：±45°  ±60°  ±90°  ±180°

摆管喷水孔径：φ0.4 间距：50mm 

淋雨水压:80～100kpa 

试验台直径:φ600mm辅助试验台φ400mm  试验台转速: 5~17r/min无级调速 

水压控制:流量计  供水系统:储水箱、增压泵  

标准配置:喷头若干只、通针  

安全保护:漏电、短路、电机过热

Arranging the radius: R400mm R600mm R800mm R1000mm R1200mm

Performance indicators: arranging the swing Angle: : plus or minus 45 ° + 60 ° + 90 ° + 180 °

Arranging the hydraulic aperture: phi 0.4 spacing: 50 mm

In the rain water pressure: 80 ~ 100 kpa

Test stand diameter: phi phi 400 mm 600 mm auxiliary test bed test rig speed: 5 ~ 17 r/min stepless speed regulation

Hydraulic control: meter water systems: storage tank and pump

Standard configuration, nozzle number, only the needle

Safety protection: leakage, short circuit, motor overheating