ZY6014H航空电线电缆燃烧试验机

Aviation cable combustion testing machine

 

根据军用标准GJB17.18-84<航空电线电缆试验方法 燃烧试验>标准制作。符合GJB17.18,MIL-W-186C22759D,81381A,ISOR1220,1491试验标准。试样两端固定并垂直置于三面是金属板的金属罩中。点燃喷灯,使蓝色内锥的在距试样下端20mm处,与试样表面相接触。

According to the national military standard GJB17.18-84 air < wire and cable test methods combustion test > standard production. C22759d meet GJB17.18, MIL - W - 186, 81381 a, ISOR1220, 1491 test standard. Sample both ends fixed vertical on three sides is a metal plate and metal cover. Lighted torch, make the tip of the blue inner cone at 20 mm from the bottom sample, contact with the sample surface.
 

试样与水平面成水平或成60°倾斜。

Sample with horizontal level or into 60 ° incline.

1,金属罩：高600mm,宽360mm,深250mm,正面和顶部敞开,底部封闭。 

2,燃烧灯：标准丙烷气体燃烧灯。外焰为175mm,内焰为55mm 

3,设定燃烧时间达到预设时间时,机器会自动停止点火。 

4,点火为自动高压电火。 

5,燃料：瓦斯.甲烷(客户自备) 

6,通风柜由客户提供和安装

1, the metal cover: 600 mm, 360 mm wide, 250 mm deep, positive and open at the top, bottom sealing.

2, burning lamp: standard propane gas burning lamp. Outer flame is 175 mm, inner flame is 55 mm

3, set the burning time reaches the preset time, the machine will automatically stop firing.

4, fire ignition for automatic packing.

5, fuel, gas, methane () by advertisers

6, provided by the customer and installation of the fume hood
 

联系方式：东莞中诺（台湾）质检仪器设备有限公司

Contact: dongguan (Taiwan) quality inspection instrument equipment co., LTD

                    （转）815

                    （艾新华）