HT3~10kg cheese tester
201120226514.0
技术功能要求:
1、适合筒子纱、大卷装筒子纱、散纤、毛团、毛条、扁带等的染色和前、后处理工序;
2、可实现3粒1公斤的筒子纱高温染色;
3、电脑自动控制降温以及恒温;
4、表面喷耐高温不锈钢金属漆,内部酸洗钝化处理;
5、配备气动阀门,主缸配翻板式液位控制器,配备安全联锁机构、主缸配有不锈钢安全
阀,手动开盖,并受温度控制,可设85℃安全保护;
6、机械密封采用硅橡胶O型密封圈以及四氟密封垫;
7、容量:3kg;
8、设计压力:0.44Mpa;
9、高温工作压力:0.40Mpa;
10、设计zui高温度:140℃;
11、zui高工作温度:135℃;
12、加热率:5℃/min; 冷却率:3℃/min水冷;
13、浴比:1:8-20;
14、锅盖密封硅橡胶带,内压自封;
15、水泵规格:离心泵2.2kw;
16、重量:约100公斤;
17、尺寸:约长1280*宽750*高1450(mm);
18、加热方式:电加热或蒸汽加热型。
Technical functional requirements
1.It is suitable for pretreating,dyeing and finishing of cheese, large package cheese
loose fibers,top, flat belt and so on;
2.Three 1kg cheese for once high temperature dyeing;
3.Computer control heating,cooling, and constant temperature;
4.Surfaces can be dealt with high temperature resistant stainless steel metallic paint,Interior can be dealt with Acid Cleaning Passion;
5.Equipped with automatic valve . Main cylinder with liquid level controller , safety interlocking mechanism and stainless steel safety valves is subject to temperature control , and security protection can be set 85℃;
6.Mechanical seal with silicone seal rubber of type O and PTFE gasket;
7.Capacity:3kg;
8.Design Pressure:044Mpa;
9.Maximum working pressure:0.40Mpa;
10.Maximum design temperature:140℃;
11.Maximum working temperature:135℃;
12.Heating rate:5℃/min; cooling rate:3℃/min;
13.Bath ratio:1:8-20;
14.Sealing cover:Internal Pressure closed by silicone rubber;
15.Pump:specifications:2.2 kw high effect centrifugal pump;
16.Weight:100kg;
17.Dimensions:1280*750*1450mm;
18.Heating mode:Electric Heating.
所列规格如有变动,本公司拥有随时更改权,恕不另行通知。
If the listed specification has any changes,our company has
right to modify with notification at any time.