Feasa多通道红外线LED波长及亮度自动化测试仪。

Feasa's Multichannel Automatic Infra-Red LED test solution for fast Wavelength & Intensity measurement.

红外线LED测试仪选择使用特别的光纤，所以必须配备专门为红外线LED测试仪设计的采光头一起使用。

The IR LED Tester has a unique fiber which has been specially selected and prepared and must be used in conjunction with the Feasa Optical Head that was specifically designed for Infra-Red LED Testing.

>工作范围：700nm to 950nmOperating Range 700nm to 950nm

>重复精度高Excellent Repeatability for Wavelength & Intensity

>安全和监视的理想应用Ideal for Security & Survellience Applications

>有3通道和10通道两种型号供选择Available in 3 and 10 Channel Models

>提供软件Supplied with Software

INTERFACES接口:

提供一个简单方便的USB接口到测试仪，不需要额外的外部供电，波特率高达460800。

USBoffers a very simple interface to the LED Analyser with no requirement for an additional power supply. Very high baud rates, up to 460800 baud, are available.

RS232接口易用于zui大波特率为115200，需要一外部电源供电。

TheRS232 Serial Portis easy to use with a max baud rate of 115200. It requires the use of an external power supply.

多个LED测试仪可以使用Daisy Chain接口串联，而只需使用一个USB或者RS232接口连接到电脑，多可支持30个LED测试仪串联。

Multiple LED Analysers can be connected together using the Daisy Chain Connectors. Only one RS232 Serial Port or USB Port is required to connect up to 30 LED Analysers.

TERMINAL SOFTWARE终端软件：

终端软件非常简单易用，当设备与电脑连接后，发送红外线LED测试指令，测试结果将自动出现在软件窗口，并能保持测试结果，以便调试试验，其主要特点如下:

The Feasa Terminal is an easy to use program which connects to the IR LED Tester and allows a command to be sent. Sent commands and responses are displayed on the window for review and can be saved for future reference or for debug purposes. Key features include:

-可连续发送多个指令到测试仪

Script processor allows multiple commands to be sent to the Analyser sequentially

-所以的指令可以保存记忆

All commands can be saved to keep a record the command sequences

-可以使用键盘的箭头键发送指令，提高调试的速度
Commands can be recalled using the up-arrow key on the keyboard to speed up the debug process

USER GAINS SOFTWARE
软件界面简单易用，并且允许调整测量输出强度，这些调整时为了补偿从通道到通道的测量输出强度的细微的参数变化，可以手动或者自动调整，主要特点如下：

This program provides an easy to use interface with the IR LED Tester to allow adjustment of measured intensity. These adjustments are used to compensate for small variations in the measurement output from channel to channel. Adjustments can be made manually or Automatically. Key features include:

-自动调整各测量通道的输出强度

Automatic adjustment of the Output Intensity of each Measurement Channel

-手动精细调整每个测量通道（光纤）

Manual adjustment for fine tuning of each Measurement Channel (fiber)

-可以记忆之前保存的调整值

Recall previously store adjustment values

-调整值可以保存，以便将来查看

Save adjustments to a file to be recalled later

SPECIFICATIONS参数：

Model and Type型号：