YUKEN油研电磁换向阀电气数据 MPW-01-4-30

预定的压力初级压力必须为1兆帕（145 PSI）比预定的压力更高
Primary Pressure Required for
Preselected PressureTheprimary pressure must be
困油容积的二次侧困油容积约为20升
must not be lower than 1.4 liters (.37 U.S.Gallons).
valuesshownarethose obtainedwhere the
differentialpressurebetween
安装面应具有良好的加工表面初级压力所需
lower than 1.4 liters (.37 U.S.Gallons)
thesecondarypressureport an
d tank port is 13.7 MPa (2000 PSI)
从上面的表中的副板型号当未使用的子板该
排水背压检查漏背压不超过0.2兆帕（29 PSI）
1 MPa (145 PSI) higher than the preselected pressure.
Drain Back PressureCheck that the
5.28 U.S.Gallons请注困油量必须不大于1.4升（0.37 U.S
drain back pressure does not exceed 0.2 MPa (29 PSI).