品牌:1128
发送询价
Y013AA3V2SS-90，MAXSEAL电磁阀代理商
Maxseal
Maxseal
Instrument Changeover and Process Control Valve for Hazardous Areas
EEx d
ICO4S 1/4"
Dimensions in mm (inches)
(3/2 Uni configuration illustrated)
Technical Specification
Protection Ingress IP65 / X8. NEMA 4X
Surge suppression diodes
Response times Pull-in < 150 ms
(typical, dependent on coil size) Drop-out < 80 ms
Response times settings Pull-in: within 87.5% of nominal (factory set at less than 75% of nominal)
Drop-out: normally 10-20% of nominal
Operating pressure ranges 0 - 20 bar(g) (0 - 290 psi) (standard)
0 - 50 bar(g) (0 - 725 psi) (option)
0 - 103 bar(g) (0 - 1494 psi) (option)
0 - 207 bar(g) (0 - 3000 psi) (option)
Certification
II 2G
EECS (BASEEFA) / SIRA CENELEC approved
EEx d IIC T6 (Ta = -60ºC to +40ºC) or
EEx d IIC T4 (Ta = -60ºC to +90ºC)
Complies with BS 5501: Part 5:1977, EN 50014:1977 (amendments 1 and 2)
and EN 50018:1994
Complies with ATEX Directive 94/9/EC
Standard Features
Port thread 1/2" NPT
Port configuration 3/2 Uni
Operating pressure 0 - 20 bar(g) (0 - 290 psi)
Actuation method Automatic
Valve material Stainless steel
BS EN 10088
Seat / Seal material High nitrile (Buna N)
Operating voltage 24V DC; 15.2W
at 20ºC (68ºF)
Conduit / Signal entry M20 x 1.5 mm ISO (F)
Paint finish Standard (green) 40 µm
Coil housing material Cast iron
BS EN 1561: 1997
Weight 3-port version: 8 kg (17.6 lb)
Cv value 4.2 (Kv 3.61)
Options
Y013AA3V2SS-90，MAXSEAL电磁阀代理商Port thread 1/2" BSPP; 1/2" BSPT
Port configuration 2/2 EO; 2/2 EC
Actuation method Autolatch, lever manual
reset (LMR), lever manual
override (LMO),
tamperproof manual reset
(see "Optional Valve
Features")
Valve material Brass BS EN 12163: 1998
Seat / Seal material Viton®
Alternative materials
available on request
Operating voltages DC: 12, 24, 48, 110, 125,
240
AC: 24, 50, 110, 240, 440
Conduit / Signal entry 1/2" NPT, 13.5 PG
Paint Epoxy (light grey) 150 µm
CV value 0 - 50 bar(g) (0 - 725 psi)
= 3.8 (Kv = 2.7)
non-universal
Maxseal
Instrument Changeover and Process
Control Valve for Hazardous Areas
EEx d
Model ICO4D 1/2"
Description
A direct-acting solenoid
valve certified for hazardous
area use as well as general
air and gas purposes in the
offshore and petrochemical
industries.
Y013AA3V2SS-90，MAXSEAL电磁阀代理商
Y013AA3V2SS-90，MAXSEAL电磁阀代理商