BJ-Ⅱ崩解时限仪 二杯智能二电机可以分别工作zui高位停机
崩解时限仪是依据《药典》对片剂、胶囊剂、及丸剂进行崩解时限检测的药检仪器。
技术指标:
△ 温度预制范围:室温~50℃,显示显示分辨率为0.1℃。
△ 温度控制精度:±0.3℃
△ 定时预制范围:1min~900min
△ 时间控制精度:±0.5min
△ 工作噪声:<60db
△ 升降吊篮数量:2套
△ 吊篮升降频率:(30~31)次/分
△ 吊篮升降距离:(55±1)mm
△ 筛网至杯底zui小间距:25mm±2mm
△ 筛网孔径:标配2mm、(0.425mm、1mm孔径可选定)
△ 电 源:220V50Hz
△ 整机功率:600W
△ 外形尺寸:长*宽*高 400mm*320mm*440mm
主要特点:
◎ 双篮工作位系统测定崩解时限。
◎ 2套吊篮,可分别进行崩解实验。
◎ 电子温度传感器可显示和监控水浴箱内各点及烧杯中的温度。采用数字电子传感器,
无需校准即可保证水浴温度的和高准确度。
◎ 仪器自动控制水浴温度为37.0℃(药典规定)。并可随时重新设定预置温度。
◎ 仪器自动设定吊篮升降时间为15分钟,也可任意重新设定。
◎ 采用单片机为核心的计算机控制技术,智能化控制水浴温度、工作时间两个性能参数。
◎ 仪器具有监控水浴温度过热报警和自动保护。
BJ-Ⅱ(译)
BJ-Ⅱ Disintegration Time Limit Tester
Disintegration time limit tester is a drug test instrument to test the disintegration time limit of tablets,
capsules and pills in accordance with Chinese Pharmacopoeia.
Technical indexes:
△ Temperature prefabrication range: room temperature:~50℃, display resolution:0.1℃.
△ Temperature control accuracy: ±0.3℃
△ Timing prefabrication range: 1min~900min
△ Time control accuracy: ±0.5min
△ Work noise: <60db
△ Number of lifting baskets: 2 sets
△ Lifting frequency of basket: (30~31) times/min.
△ Lifting distance of basket: (55±1) mm
△ Minimum spacing from screen to beaker bottom: 25mm±2mm
△ Mesh size: standard configuration 2mm, (optional for 0.425mm and 1mm bore diameters)
△ Power supply:220V50Hz
△ Total power:600W
△ Overall dimensions:L*W*H 400mm*320mm*440mm
Main features:
◎ Double-basket working position system measures disintegration time limit.
◎ 2 sets of baskets, which can conduct independent disintegration experiment respectively.
◎ Electronic temperature sensor can display and monitor various points in water bath case and the temperature in the beaker. High-precision digital electronic sensor is adopted to ensure the high precision and high accuracy of water bath temperature without
the need for calibration.
◎ The instrument controls the bath temperature at 37.0℃ automatically (prescribed by Pharmacopeia).
It can also reset the preset temperature again at any time.
◎ The instrument sets the lifting time of baskets to be 15min automatically, which can also be reset at any time.
◎ It adopts the computer control technology which is centered on SCM to control two performance parameters
including bath temperature and working time intelligently.
◎ The instrument can monitor bath temperature, give over-temperature alarm and protect itself automatically.