- Miniature package
- Excellent performance in vibration and shock
- Excellent environmental robustness
- 1, 2 or 3 axes offered in same package
- Electronically calibrated axis alignment
- Plug & play high-level RS422 interface
- 24 bits resolution
- Single-crystal silicon technology
- Low bias drift
- Low noise
- Fully configurable:
- 5 different sampling rates available
- 5 different bandwidths available
- LP filter -3dB frequency can be set individually for each axis
- RS422 protocol, bit rate and line termination
- Selectable output unit: angular rate [deg/s] or incremental angle [deg] - Continuous self-diagnostics
Performance
Each axis is factory-calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a "plug & play" high-level RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters.
For more advanced users, STIM210 may be put in Service Mode. In this mode all the configuration parameters can be intermediately or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.
| Parameter | Min | Typ | Max | Unit | Comment |
| Range |
±400 |
°/s |
|||
| Output | 24 |
bit |
RS422 |
||
| Bias instability |
0.5 |
°/h |
|||
| Angular random walk |
0.15 | °/√h |
|||
| Sampling frequency |
2000 |
SPS |
Normal value |
区总代理：
成都耐威科技有限公司
地址：成都市高新西区西芯大道5号汇都企业总部园2号楼9层。
电子邮件：
：