价格:未填

发送询价

ODE两位两通电磁阀的工作原理资料
permitting fluid to flow from the inlet pipe to the outlet one and
preventing flow to the exhaust.
In this family of solenoid valves an increase in pressure causes
a reduction in the force required to open the valve: if the
pressure difference between inlet and outlet is greater than
the maximum value for which the solenoid valve has beendesigned,
the latter may open even when the coil is not energized.
3 way normally closed solenoid valves have an inlet pipe, a
outlet pipe and an exhaust pipe. The plunger, on which two
gaskets are mounted, provides directly for opening and closing
the solenoid valve’s main orifice with one of the two gaskets
and, simultaneously, opening or closing the outlet orifice
with the other gasket.
ODE两位两通电磁阀的工作原理资料
When the coil is not energized the
plunger is in such a position as to close the main orifice, preventing
the flow of fluid from the inlet pipe to the outlet pipe,
whereas the outlet pipe is in communication with the exhaustpipe.
On these valves, unlike the other models,
流体应进入进入阀门，以便通过主孔口下侧向较高的一侧。
当线圈通电时，柱塞移动到位置其打开主孔并关闭排气孔，
允许流体从入口管流出到出口一端防止流向排气。
在这个电磁阀系列中，压力增加会导致减少打开阀门所需的力量：
如果入口和出口之间的压力差大于电磁阀已经被配置的大值，

ODE两位两通电磁阀的工作原理资料