价格:未填

发送询价

技术参数:
200 MHz, 采样率2.5 GS/s, 2通道, 存储深度12.5 Mpts/Ch 12-bit精度 HD Oscilloscope with 12.1" WXGA 彩色显示屏
性能特点:

Vertical System 
Bandwidth 200 MHz 
Rise time 1.75 ns 
Input Channels 2 
Bandwidth Limiters 20 MHz 
Input Impedance 1 MΩ ±2.0% || 15 pF, 50 Ω ±2.0% 
Input Coupling AC, DC, GND 
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 VRMS 
Channel-Channel Isolation ≥ 30 dB 
Vertical Resolution 12-bits 
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1mV/div - 1 V/div 
DC Gain Accuracy ±(0.5%) Full Scale, offset at 0 V 
Offset Range 50Ω
+/-1.6V: 1mV/div-4.95mV/div
+/-4V: 5mV/div-9.9mV/div
+/-8V: 10mV/div-19.8mV/div
+/-10V: 20mV/div-1V/div

1MΩ
+/-1.6V: 1mV/div-4.95mV/div
+/-4V: 5mV/div-9.9mV/div
+/-8V: 10mV/div-19.8mV/div
+/-16V: 20mV/div-100mV/div
+/-80V: 102mV/div-198mV/div
+/-160V: 200mV/div-1V/div
+/-400V: 1.02V/div-10V/div 
  
Horizontal System 
Time/Division Range 20 ps/div - 10000 s/div 
Clock Accuracy ±2.5ppm for 5 to 40C + 1.0ppm/year from calibration 
Trigger and Interpolator Jitter 4.5 ps (rms) 
  
Acquisition System 
Single-Shot Sample Rate/Ch 2.5 GS/s 
Equivalent Sample Rate 125 GS/s 
Memory 25 Mpts/Ch on 1 Ch
12.5 Mpts/Ch on 2 Ch 
  
Acquisition Modes 
Averaging Up to 1,000,000 
Peak Detect na 
Interpolation Linear, Sin x/x 
Enhanced Resolution Up to 15 bits 
Sequence Mode Up to 10,000 segments 
  
Triggering System 
Modes Normal, Auto, Single, Stop 
Sources Ch 1 - Ch 4, EXT, EXT/10, AC Line 
Coupling Mode AC, DC, LF Rej, HF Rej 
Pre-trigger Delay 0- of full scale 
Post-trigger Delay 0-10,000 Divisions 
Hold-off by Time or Events 2ns up to 20s 
Internal Trigger Range ±4.1 Divisions 
Trigger Sensitivity 0.9 division: 10 MHz
1.0 divisions: 100 MHz
2.0 divisions: 200 MHz 
External Trigger Sensitivity 0.9 division: 10 MHz
1.0 divisions: 100 MHz
2.0 divisions: 200 MHz 
External Trigger Input Range Ext: ±0.4 V, EXT/10: ±4.0 V 
  
Display 
Type Color Touch Screen 12.1" TFT-LCD 
Resolution 1280 x 800 
Grid Styles YT, XY 
  
Trigger Types 
Standard Triggers Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified 
Optional Advanced Triggers na 
Optional Serial Data Triggers I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G 
  
Internal Storage 
Waveform Storage 4 memory waveforms plus internal HDD 
Setup Storage 6 setups 
  
Math 
Number of Math Traces 2 
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom 
Optional Math Functions na 
  
Measurements 
Number of Measurements Displayed 8 
Measurement Parameters Ampltidue, Area, base, Delay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Time @ Level, Top, Width+, Width- 
  
Probes 
Probes Qty. (4) ÷10 Passive Probes 
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000
Variable: (÷1x10-6 - ÷10000) 
Calibration Output 1 kHz square wave, 1.0 Vp-p,
output to probe hook 
  
Interface 
GPIB Port (optional) 1 (optional) 
USB (Device) 1 
Ethernet Port 1 
USB (Host) 6 
Serial Port 0 
  
Power Requirements 
Voltage 90 - 264 VAC, 45 HZ - 66 Hz
90 - 132 VAC, 380 HZ - 420 Hz 
Max. Power Consumption 330 VA 
  
Environmental and Safety 
Temperature (Operating) 5 °C to 40 °C 
Temperature (Non-Operating) -20 °C to 60 °C 
Humidity (Operating) 80% RH, 31 °C
50% RH, 40 °C 
Humidity (Non-Operating) 95% RH 
Altitude (Operating) 3,048 m max at <=30C 
Altitude (Non-Operating) 12,192 m 
  
Physical Dimensions 
Dimensions (HWD) 291.7 mm x 399.4 mm x 131.31 mm
(11.48" x 15.72" x 5.17") 
Weight 5.86 kg (12.9 lbs) 
  
Warranty and Service 
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.