价格:未填

发送询价

MTM12-830W/MIDAC蓄电池~意大利进口、叉车专用电池
MTM12-830W/MIDAC蓄电池~意大利进口、叉车专用电池
MTM12-830W/MIDAC蓄电池~意大利进口、叉车专用电池
based on MHE system technology, the fast-charge version has been specifically designed for two shift operation and can be sized for up to 24h/5 day use through opportunity charging, with weekend equalization, while preserving the expected equivalent life of 1800 cycles and introducing enhanced safety characteristics and savings in terms of fleet management costs. In combination with battery change solutions, MHEfast completes the most advanced proposal to satisfy any requirement.
Perfectly integrated Battery Module Unit, the MB2 takes reading of ALL the essential parameters like terminals and half battery voltage, in/out current, electrolyte level and temperature, with lab-instrument accuracy, while preserving high mechanical strength and chemical-proof characteristics during the entire battery life. Constantly communicating with the MIDATRON unit using Powerline wireless technology, MB2 provides record of any relevant event and proactively adjusts the charging algorithm parameters. Responding to the most severe safety protocols, the MIDATRON MB2 system constitutes ultimate solution for Battery Management requirements. Modulo batteria perfettamente integrato nel sistema, MB2 mantiene monitorato ogni parametro essenziale come tensione ai terminali ed a metà batteria, corrente in ingresso ed in uscita, temperatura e livello dell’elettrolito, con la precisione di strumenti da laboratorio, preservando un’elevata robustezza meccanica e caratteristiche di resistenza all’aggressione da parte di agenti chimici nel corso dell’intera vita della batteria. In costante comunicazione con il caricabatteria MIDATRON mediante l’impiego della tecnologia ad onde convogliate, MB2 registra ogni evento rilevante e proattivamente controlla i parametri dell’algoritmo di ricarica. Rispondente ai più severi protocolli di sicurezza, MIDATRON-MB2 costituisce l’avanguardia per ogni necessità di gestione della batteria.

规格

正板：铅硒栅合金管状板（SB＜2%）和编织手套

负板：铅硒栅合金（Sb＜2%）全包层扁平贴片

分离器：微孔塑料分离器

容器：高强度透明SAN（选项：可在阻燃PC UL94 V0版本）

盖板：不透明灰色ABS（选项：可在阻燃UL94 V0版本）

电解液：硫酸溶液在20°C时的Sg1.240±0.01稀溶液
电解液储备：大可用性

端子柱：坚固设计D.30毫米与M10螺纹插入
封口：HQ后整理双重密封

通风口：阻火器陶瓷排气口完全符合UL标准测试（可选：翻盖）
板悬架：底部支承有泥沙空间

电池间连接器：完全缘铜

端子五金：全缘钢
端子适配器：实心镀铜板
质保规则：
质量保证期限：视使用方法及使用客户，质保期为三年。
使用说明：铅酸蓄电池长时间放置三个月要为电池补充电量，放置半年让电池充放一次，达到一个循环;使用过 程中，切忌把电放干再充电，对电池影响很大，要 随用随充电，充满为止，但也不要过充、过放电。
包装：为纸箱，根据运输距离可打扎带，可打木箱。 纸箱包装：1只/箱，采用物流长途运输或两箱打一个包 装，节约运输费用。
运输：样品可采用快递方式，批 量货，可采用物流或客车， 部分地区根据长期经销商情况可采用代收款的方 式或预付30%--70%定金，余款代收的方式。
验收：不管采用哪种方式运输货物，请客户和收货人一定在承运单位当事人在场时当场查验收货，查看外包 装，是否破损，变形，是否沾水，小件可拿起来晃动，听听内部是否有配件脱落，用手捏一捏内部是否有 碎屑或裂缝等，确保我们的货物和产品安全到达目的地。若遇到不可抗因素，我们三方可协调解决运输问 题 。