价格:未填

发送询价

STORAGE TEMPERATURE -20° to 180° F (-29° to 82°C)
AMBIENT TEMPERATURE 30° to 160°F (-1° to 71°C). Set point typically shifts less than
±0.6% of range for a 50°F (28°C) ambient temperature change;
consult factory for special ratings
MAX MEDIA
TEMPERATURE 200°F (93°C) at 100 psi working pressure;
160°F (71°C) at 100 psi working pressure for models 030, 031
SHOCK Set point repeats after 15G, 10 millisecond duration. (MIL-STD-810)
VIBRATION Set point repeats after 2.5 G, 5-500 CPS. (MIL-STD-810)
ENCLOSURE CLASSIFICATION Complies with enclosure type 4 requirements with optional water
tight conduit connector. Reinforced polyester body, stainless steel
cover with neoprene gasket. All external hardware Teflon ® coated
on models 030 and 031
SET POINT REPEATABILITY Typically ± 1% of span. Application dependent. Consult factory
SWITCH OUTPUT SPDT precision snap-acting design with mechanical contact life of
10 million cycles. Actual life depends on electrical load and cycle
frequency
ELECTRICAL RATING Rated to 5 A resistive and 5 A inductive (75% PF) at 125 VAC and
250 VAC, 1/4 HP; 5 A resistive and 3 A inductive at 30 VDC and
0.5 A resistive and 0.25 inductive at 125 VDC. Gold clad silver
contacts for minimum loads of 5 mA at 6 VDC, 2 mA at 12 VDC
and 1 mA at 24 VDC
WEIGHT 6.5 oz.
ELECTRICAL ConNECTION 7/8" hole for optional 1/2" NPT conduit connector. Terminal block
with screw terminals. Max wire size 16 AWG
PRESSURE ConNECTION 1/4" NPT (female) Brass; 1/4" NPS (female) FDA approved polysulfone®,
non-tapered to minimize connection stress with 1/4" NPT (male)
fittings, Max. torque 2 ft. lbs.;1/4” Flaretek® style connections
(nuts provided). Offers high vibration, leak resistant connections
with minimal dead volume. On models 030 and 031 pressure
connections are PFA Teflon®, nuts are PVD female
MOUNTING & INSTALLATION Surface mount with two screws through clearance holes, or mount
by pressure connections