品牌:2362
名 称:梯度凝胶生成系统
型 号:LF-TD01
品 牌:北京龙方
北京龙方LF-TD01梯度凝胶生成系统 凝胶分析仪产品特点:
梯度生成仪为高透明度亚克力双筒一体化设计,美观实用;
梯度胶生成系统可灌制丙烯酰胺梯度凝胶,容量为100ml(单筒);
可在多板制胶器中灌制多达12块厚度为0.75、1.0或1.5mm的凝胶;
灌制凝胶数少于12块时,使用丙烯模块充当空间填充物;
梯度凝胶生成系统从多板制胶器底部注入凝胶,形成可重复性的梯度凝胶;
北京龙方LF-TD01梯度凝胶生成系统 凝胶分析仪技术参数:
梯度胶生成仪凝胶容量:100ml(单筒);
多板制胶器中单次制胶数量:1—12块凝胶,凝胶厚度为0.75、1.0或1.5mm;
梯度凝胶多板制胶器底部注入,形成可重复性的梯度凝胶;
系统配置:
1. 梯度胶生成仪;2. 多板制胶器;3. 恒流泵;4.磁力搅拌器。
The English version of the product introduction:
LF-TD01 gradient gel generation system
Features:
The gradient generator is an integrated design of high-transparency acrylic binoculars, which is beautiful and practical;
The gradient gel generation system can pour acrylamide gradient gel with a capacity of 100ml (single cylinder);
Up to 12 gels of 0.75, 1.0 or 1.5mm thickness can be cast in a multi-plate gel maker;
When the number of poured gels is less than 12 pieces, use the acrylic module as space filler;
The gradient gel generation system injects gel from the bottom of the multi-plate gel maker to form a reproducible gradient gel;
technical parameter:
Gradient gel generator gel capacity: 100ml (single cylinder);
Quantity of single glue making in the multi-plate glue making machine: 1-12 pieces of gel, the thickness of the gel is 0.75, 1.0 or 1.5mm;
The bottom of the gradient gel multi-plate gel maker is injected to form a reproducible gradient gel;
System Configuration:
1. Gradient gel generator; 2. Multi-plate gel maker; 3. Co
北京龙方LF-TD01梯度凝胶生成系统 凝胶分析仪